Tips for Indoor LED Display Screens

1.Power Sequence:

When turning on :first power on the device ,then turn on the screen ,When turning off: first turn off the screen, then power down the device.

(Turning off the computer without shutting down the display can cause bright spots on the screen, damaging the lamps, which can have serious consequences.)

2.Interval Time:

Ensure that the interval between switching the LED display on and off is greater than 5 minutes.

3.Software Activation:

Only power on the screen after the computer has entered the control software.

4.Avoid Full White Screen:

Do not turn on the screen while it is displaying a full white screen, as this is when the system experiences the highest inrush current.

5.Avoid Uncontrolled States:

Do not turn on the screen if it is in an uncontrolled state, as this is also when the system experiences the highest inrush current.

6.Possible uncontrolled states include:

1. The computer has not entered the control software.
2. The computer is not powered on.
3. The power supply for the control section is not turned on.

7.High Temperatures:

Be cautious not to keep the screen on for extended periods in high temperatures or poor heat dissipation conditions.

8.Bright Lines:

If a part of the LED display shows a very bright line, promptly turn off the screen, as it should not be kept on in this state for long.

9.Power Switch Tripping:

If the power switch for the display frequently trips, inspect the display or replace the power switch as necessary.

10.Regular Inspections:

Periodically check the stability of the mounting points. If there is any looseness, promptly adjust, reinforce, or replace the hanging components.

11.Pest Control:

Depending on the environmental conditions of the display and control section, take measures to avoid pest infestations; consider placing rodent repellent if necessary.